Only the administrator of the system can install the RPV Tools. To check if the user is the administrator click
START SETTINGS CONTROL PANEL USER ACCOUNTS. The computer administrator information will show
below the login. If the user is not the computer administrator contact the manager of your system.
To install the software, follow the procedures below:
1. Insert the CD-ROM in the CD-ROM unit of the PC;
2. Access the CD-ROM unit, double click on the rpv-software. install-en-swvrr.msi file (for example: rpv-
software.install-en- 04A00.msi);
3. The screen RPV Tools Setup will appear. Accept the terms in the License Agreement and click
<INSTALL>. Wait for the complete installation of the software;
4. After installation is finished, click <FINISH> and then click <YES> to restart the system.
Four icons for quick access to the applications will be created on the Desktop and an RPV directory will be
created in the root directory where Windows is installed. For example: C:RPVconftool\conf. The same
applications also can be accessed by clicking Start Programs RPV.
It is necessary to restart the PC to complete the removal process.
The RPV Tools installation is in the same disk where Windows is installed.
The installation process takes up to 5 minutes.
2.1.2 UNINSTALLING
To uninstall the software, click START SETTINGS CONTROL PANEL ADD OR REMOVE PROGRAMS. And then
select RPV TOOLS on the list and click <REMOVE> then click <YES> on the ADD OR REMOVE PROGRAMS
window.
The removal process takes about 4 minutes.
The directory containing the files will not be removed.
2.2 SCANNER
2.2.1 DESCRIPTION
The Scanner is a tool that searches for the records in several pieces of equipment; it transfers and saves
them in an organized manner on the user's PC. The Scanner does a recurrent scanning of the equipment's
records, meaning that it scans all the pieces of equipment and, after some programmable period of time, it
starts the scanning again.
2.2.2 ACCESS
To Next Page
Loading...