Alstom Reason RPV311 - Adding New Power Thresholds; Figure 28: Adding and Editing a Current Threshold

RPV311
Chapter 4 – Configuration
RPV311-TM-EN-6
89
Figure 28: Adding and editing a current threshold
A The <APPLY ALL> button allows user to apply the hold time or the hysteresis for all thresholds.
B The <REMOVE> button allows user to delete the threshold.
9.3 ADDING NEW POWER THRESHOLDS
To add a power threshold, fill in the following:
 The SOURCE scroll box allows user to define a code of a power circuit used. No editing allowed.
 The QUANTITY scroll box allows user to select the associated magnitude to be monitored. For power
circuits:
o  - total apparent power;
o  - apparent power;
o  - active power;
o  - reactive power;
o  - total apparent power variation;
o  - apparent power variation;
o  - active power variation;
o  - reactive power variation;
o  - power swing;