Chapter 4 – Configuration
The OPERATOR scroll box allows user to select greater than or less than for analog magnitude;
The VALUE text field allows user to enter the magnitude value associated with greater than or less than
operator;
The HOLD TIME text field allows user to enter the time in milliseconds, where the threshold needs to be
exceeded to be considered valid;
The HYSTERESIS text field allows user to enter a percentage of the VALUE , the quantity monitored needs to
exceed that percentage in order to end the event and to reset the threshold detector.
Once the threshold is created, it appears in the configuration interface menu. When selecting the threshold, a
screen shows the characteristics of the threshold selected, as shown in Figure 27. It is possible to edit the
value, hold time, and hysteresis.
Figure 27: Adding and editing a voltage threshold
A The <APPLY ALL> button allows user to apply the hold time or the hysteresis for all thresholds.
B The <REMOVE> button allows user to delete the threshold.
9.2 ADDING NEW CURRENT THRESHOLDS
To add a current threshold, fill in the following:
To Next Page
Loading...