Chapter 4 – Configuration
The OPERATOR scroll box allows user to select greater than or less than for analog magnitude.
The VALUE text field allows user to enter the magnitude value associated with greater than or less
than operator.
The HOLD TIME text field allows user to enter the time in seconds, where the threshold needs to be
exceeded to be considered valid. For the SOSC power threshold, this field is called OSCILLATION
TIME;
The HYSTERESIS text field allows user to enter a quantity in , whose value needs to be smaller in
relation to the threshold to determine the end of the event and to reset the threshold detector.
Once the threshold is created, it shows in configuration interface menu. When selecting the threshold, a
screen shows the characteristics of the threshold selected, as shown in Figure 29. It is possible to edit the
value, hold time, and hysteresis.
Figure 29: Adding and editing a power threshold
A The <APPLY ALL> button allows user to apply the hold time or the hysteresis for all thresholds.
B The <REMOVE> button allows user to delete the threshold.
To Next Page
Loading...