Chapter 2 – Safety Information
6 STANDARDS COMPLIANCE
Compliance with the European Commission Directive on EMC and LVD is demonstrated using a Technical
File.
6.1 EMC COMPLIANCE:
Compliance with IEC 60255-26:2013 was used to establish conformity.
6.2 PRODUCT SAFETY: 2006/95/EC
Compliance with IEC 61010-1:2010 was used to establish conformity.
PROTECTIVE CLASS
Protective Class 1. This equipment requires a protective conductor (earth) to ensure user safety.
INSTALLATION CATEGORY
IEC61010-1:2010 Overvoltage Category II.
ENVIRONMENT
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-14, IEC 60255-21-1, IEC 60255-21-2. The
equipment shall always be installed in a specific cabinet or housing which will enable it to meet the
requirements of IEC 60529 with the classification of degree of protection IP54 or above.
6.3 R&TTE COMPLIANCE
Radio and Telecommunications Terminal Equipment (R&TTE) directive 99/5/EC.
Conformity is demonstrated by compliance to both the EMC directive and the Low Voltage directive, to zero
volts.
To Next Page
Loading...