Chapter 4 – Configuration
D To send the changes to the equipment, click on the <TRANSMIT> button. Before sending the configuration
to the equipment, the user must define the changes to be included in the configuration history. By clicking the
<OK> button, the configuration is send and the equipment will be temporarily unavailable.
E Arrows to pass by the menu items.
If the configuration is not transmitted to the equipment, the changes are not applied.
Opening more than one configuration section at a time is not allowed. If a second session is required, the
following message will show:
The server is temporarily unable to service your request due to maintenance downtime or capacity problems.
Please try again later.
By using the Configuration Tool, which is part of the RPVTools package, it is possible to receive, manage,
save, edit and transmit the configuration between equipment and a computer.
For information about the Configuration Tool, see Chapter 11.
2.1 CONFIGURATION HISTORY
The history of changes in the equipment configuration can be shown in the Web Interface. The information
shown is:
Revision Indicates the number of each configuration;
Time stamp Indicates the date and time the configuration was changed;
User Indicates who changed the configuration;
Description Describes the change.
To obtain a report about the configuration, select the revision of the configuration and click on the <REPORT>
button. A new window will open displaying all the information about the configuration selected.
To Next Page
Loading...