Alstom Reason RPV311 - RPV311 Components

RPV311
Chapter 3 – Hardware Design
50
RPV311-TM-EN-6
3.1.2 COMPONENTES
Front view of the RPV311, showing all the main components on the front panel.
Figure 3: Front View of the RPV311
A Indicators of the state of the equipment:
Alarm: Lights up when the equipment requires attention of the operator.
Trigger: Flashes when a threshold has been triggered;
Sync: Lights up when the internal clock and the acquisition system are synchronized through the IRIG-B
signal, whether the GPS Clock that provides the IRIG-B signal is locked or not;
Ready: Lights up after the equipment has passed through the self-test routines and is then in normal
operation.
B Local interface for human-machine interaction.
C Buttons for navigation on the local interface.
Back view of the RPV311, showing all the main components on the back panel.
Figure 4: Back view of the RPV311