1. Click START PROGRAMS ACCESSORIES COMMAND PROMPT;
2. At Prompt, access C:\RPV\GOOSEMONCONFIG\RESOURCES;
3. Run the GOOSEMONCONFIG.EXE file and the application will open.
The initial screen of the GOOSE Configurator application is shown in Figure 81 and has the following
characteristics:
A The GOOSE's list the configuration files loaded. These files are divided into GOOSE CONTROL BLOCK,
which are composed of datasets with binary elements that can be associated with the digital channels of the
RPV.
B The Digital channel of the RPV has the 320 binary magnitudes of the RPV, which can be associated to
GOOSE messages. These inputs shall be identified in the RPV.
C The buttons allow association or disassociation of a GOOSE CONTROL BLOCK to a digital input of the RPV.
D The STATUS indicates the status of each operation.
Figure 81: Initial screen of the GOOSE Configurator
2.5.3 CONFIGURATION
To Next Page
Loading...