Chapter 4 – Configuration
2 ACCESSING THE EQUIPMENT CONFIGURATION
Access to the equipment's configuration is provided by the Web Interface. When the equipment is accessed,
a copy of the current configuration is maintained on the equipment until a new configuration is sent.
To enter the configuration interface, click on the <CONFIGURE> button of the initial Web Interface. A new
window is open. The username and password are required. The default username and password are:
Default username and password to enter the configuration interface
The initial configuration screen is shown in Figure 8.
Figure 8: Initial configuration screen
A Equipment identification.
B Menu configuration items. It is recommended that the configuration of the equipment be performed item by
item in top-to-bottom order. The menu items in the configuration can be configured one by one and by
clicking on the <OK> button, the changes are saved in the interface but will not be sent to the equipment. By
clicking on the <CANCEL> button, the changes are discarded.
C The <LOGOUT> button allows user to logout the configuration section.
To Next Page
Loading...