Alstom Reason RPV311 - RA331 Features and Components

To Next Page

To Previous Page

Chapter 3 – Hardware Design

RPV311

RPV311-TM-EN-6

D Up to 8 pairs of connectors for fiber-optic links. For each link there is an Act indicator that lights up when

the link is receiving data of the acquisition module.

E AC or DC power input.

F 4 dry contact relays.

G Electrical and Optical (optional) IRIG-B input for the external synchronization of the equipment.

H 2 electrical Ethernet interfaces for the communication between the equipment.

I 1 electrical Ethernet interface for the Process Bus communication.

J Double internal converter for optical Ethernet interface.

K Serial port RS323 for modem connection.

L Maintenance ports for exclusive use by Alstom's technical support personnel.

3.2 RA331

3.2.1 MAIN FEATURES

 Up to 8 analog inputs (voltage, current, DC transducers, probes);

 Up to 32 digital inputs;

 16-bit analog-to-digital converters, 256 points-per-cycle sampling rate;

 Frequency response of DC to 3.0 kHz;

 Fiber-optic interface to connect to the processing module;

 Up to 2 km fiber-optic links;

 Front panel mounting or internal panel mounting.

3.2.2 COMPONENTS

Figure 5 shows all the components of the RA331 module.