D SOE records listed, with the following information:
Time stamp: indicates the date and time of event log (yyyymm-dd hh:mm:ss[.uuuuuu] 0000 (UTC
time offset);
Cause: indicates threshold exceeded;
Duration: record length in seconds.
E The <COMTRADE> button allows download of record, line per line, and saving it in the Comtrade format,
and compression as .zic file.
F The <CLOSE> button allows user to close the section.
3.7 MONITORING
With the Web Interface it is possible to monitor the values related to circuits and channels in three different
ways: through Plots, Current and Voltage Circuits, and Digital Channels.
3.7.1 MEASUREMENTS
Voltage and Current Measurement:
The values listed below are computed at the nominal system frequency (50 or 60 Hz):
Voltage and current measurement
Total harmonic distortion ²
To Next Page
Loading...