The General Information screen, shown in Figure 68, displays general information about the equipment,
such as:
Figure 68: General Information screen
A General information about the equipment, such as:
Equipment model: model of RPV;
Processor: processor type;
Module identification: unique identification code of the module;
Frequency: nominal frequency reference;
Type of sequence: phase sequence reference (ABC, ACB, BAC, BCA, CAB, CBA);
Firmware version: the current firmware version for the equipment.
B The key related to the features enabled on the equipment.
C The equipment features enabled or disabled.
D The <SETUP> button allows user to set some features of the equipment.
E The <CLOSE> button allows user to close the section.
Clicking on the <Setup> button will open a screen, shown in Figure 69, which displays the equipment model,
processor type used, and enables the user to change the following parameters:
To Next Page
Loading...