Chapter 4 – Configuration
Figure 17: Adding new user section
A The USER text field allows entering a user identification (maximum 8 characters). No editing is allowed.
B The NEW PASSWORD text field allows user to enter a new password to access the Web Interface (maximum
8 characters).
C The CONFIRM text field allows user to confirm password entered in the field above.
D The ALLOW user to configure equipment check box allows user to set the equipment and also to access
the Web Interface.
To delete a user, select the user in the configuration interface menu and click on the <REMOVE> button. User
can be deleted only if there is more than one user entered and may be performed by any user who is
authorized to access equipment setup.
In the USER - ADMIN section, shown in Figure 18, it is possible to change the administrator password.