2.2.4 STARTING SCANNER
There are 2 possible ways to start the Scanner:
1. Double click on the Scanner icon on the Desktop;
2. Click on Start Programs RPV Scanner.
The Windows security alert window may appear during the first cycle of the Scanning. Click on the
<UNBLOCKED> button to start the second cycle.
Example:
C:RPVscannerresourcesscanner Scanner 02A00 Starting cycle 1
1: Scanning records of the RPV 192.168.0.195: "fault disturbance steadystate soe"
1: Records transferred of 192.168.0.195. Waiting 300.0 seconds for the next cycle...
2.2.5 TERMINATING THE SCANNER
To stop using the Scanner, either press <CTLR> + <C> or close the command Prompt.
2.2.6 RECORDS
The records received are saved in C:RPVrecords,as shown in Figure 77.
[location, RPV identifier][record type].
To Next Page
Loading...