8
ML-5120A
For Use in Safety
Wear protective glasses.
Be sure to wear protective glasses having an optical density of at least
7 while using the Laser. Even if you wear them, you may lose your sight
if the laser beam enters your eyes directly through protective glasses.
Protective glasses attenuates the laser beam, but does not block it.
Do not look into or reach into the light path while the LD is turned on.
Fluorescence emission can cause burn or blindness.
Wear protective glasses while the LD is turned on.
Do not expose your skin to the laser beam.
Your skin may be severely burnt.
Do not touch any processed workpiece during and just after processing
nished.
The processed workpieces are very hot.
Use only specied cables.
Use of a cable of insucient capacity or loose connection can cause
electric shock re.
Do not damage the power cable or connecting cables.
Do not tread on, twist or tense any cable. The power cable and connecting
cables may be broken, and that can cause electric shock and re. If any
part needs to be repaired, consult us or your distributor.
Stop the operation if any trouble occurs.
Continuous operation after occurrence of a trouble such as burning smell,
abnormal sound, abnormal heat, smoke, etc. can cause electric shock and
re. If such a trouble occurs, immediately consult us or your distributor.
Ground the Laser.
If the Laser is not grounded, you may get an electric shock when there is
trouble or electricity leaks.
Use a stopper.
The laser beam is dangerous to human bodies. Prevent emission through
the air by using a stopper (a heat-resistant, laser beam-absorbing,
-scattering material).
Persons with pacemakers must stay clear of the Laser.
Those who use a pacemaker must not approach the Laser or walk
around the processing shop while the Laser is in operation, without being
permitted by his/her medical doctor. The Laser generates a magnetic eld
and has eects on the operation of the pacemaker while it is turned ON.
WARNING
To Next Page
Loading...
Need help?
General