Installation and Operating Instructions 87
Storage
Storage
Use the Storage Setup screen to configure databases located on
volumes that are available on this Intellex unit or its attached
storage media. Each database listed is identified by the following
information.
Path — The path to the volume. Usually a drive letter, like “D:”.
Label — This is a user defined label for a drive.
Status
Active — Currently in use to store Intellex data.
Empty — No files in use on this volume.
Non-Intellex — Volume contains non-Intellex data.
Missing — A previously active volume that cannot be found.
Failed — A previously active volume that has failed.
Corrupt — A previously active volume that is now corrupt.
Other Intellex — This volume contains a compatible database
(version 2.4 or later) from a different Intellex.
Size — The total size of the drive.
Allocated — The total amount of the drive that has been allocated
for use by the database.
Time Range — Displays the time range for Intellex data that is on
the volume. If the volume is empty, or if the volume is currently
being recorded to, the start time and/or the end time will be
represented by an asterisk.
Add — Adds a volume to the Intellex database. If Intellex finds a
compatible volume (version 2.4 or later), you are prompted to add
its data to this database or to erase it and add the available space to
this unit.
Add All — Adds all the empty drives.
Remove — Removes an active volume from the database; it will
then appear as “Other Intellex.”
Label — Applies a user-defined label to the selected volume.
Repair — Repairs a corrupted database.
Click Exit to return to the Setup Options screen. Click Help to display
online help for this screen.
To Next Page
Loading...
