6 Intellex
®
LT Digital Video Management System
Accessories
Accessories
Intellex USB Floppy
Drive
The USB floppy drive can be used to save Intellex configurations,
single .BMP images from the image tools feature, and to install
software patches and upgrades.
Intellex USB CD-RW
Drive
The USB CD-RW drive can be used to export video clips to CD-R or
CD-RW disks or to update the Intellex software.
Intellex USB/RS-232
4-Port Expander
The 4-Port Expander can be used to add serial ports to the Intellex
for the recording of text data.
Intellex Speakers
The speakers can be used to listen to recorded audio information or
to monitor live audio activity.
Call Monitor
A single camera’s live (real-time) video signal can be viewed on an
additional video monitor (the Call Monitor board must be
upgraded to the fully populated version to support this option).
This live display is initiated by the user’s command or triggered by
an alarm input in one of two modes: Call Mode or Spot Mode. In
Call Mode, video from a specific camera is displayed on the call
monitor when commanded by the user. In Spot Mode, the Intellex
unit automatically displays video in sequence from alarmed
cameras to the call monitor (similar to how a multiplexer
sequentially displays camera signals). The Call Monitor function
can also be controlled via a serial connection from a Touch Tracker
controller.
Dome Control
Camera control can take place locally at the Touch Tracker or
remotely at a Network Client workstation. Refer to the Network
Client operating instructions for details. Concurrent local and
remote operation can cause control conflicts. The camera will
respond to the last control action performed whether that is at the
Touch Tracker or the Network Client. Remember that unexpected
actions of a camera can be the result of another user trying to control
the same camera.
Use of the Touch Tracker version 2.x firmware can minimize control
conflicts. This firmware permits concurrent control of two different
cameras connected to the same Touch Tracker, one locally and one
remotely. Conflicts can still occur if the same camera is being
controlled.
To Next Page
Loading...
