American Dynamics Intellex Intellex LT - Chapter 8: Image Database Search and Analysis; Image Database Search Overview; Searching Without Filters

108 Intellex
®
LT Digital Video Management System
Utility Options
Erase CD-RW
Use this option to erase a rewritable CD (CD-RW) disc. After
inserting the CD-RW drive, click OK. A message displays when the
disc is erased.
Log Out
Use this option to inform the system that you are transferring
control to a different user. The unit blocks all access until a new user
logs in. Normal processing continues whether or not a user is
logged in.
NOTE: This option is only available if system security is enabled
(see Security Setup on page 39).
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options on page 105).
2. Click Log Out. A confirmation message appears.
3. Select No to close this screen without logging out. Select Yes
to log out. The system displays the Enter PIN code screen.
Shutdown
The Intellex digital recorder is designed to operate continuously.
However, if you must shut it down, use the following procedure.
CAUTION: Always complete the shutdown procedure before
turning off unit power.
NOTE: Shutting down the system is a protected feature. You
must possess the Shutdown privilege to access it (see
Security Setup on page 39).
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options on page 105).
2. Click Shutdown. A confirmation message appears.
3. Select No to cancel the shutdown and return to the Utility
Options screen.
NOTE: If the unit is backing up images, it interrupts the backup
before shutting down.
Click Yes to shut down the system. The unit exits the Intellex
software and turns off unit power automatically.