148 Intellex
®
LT Digital Video Management System
Alarm Review Screen
ALARM REVIEW
SCREEN
When one or more alarms have not been reviewed, the Alarms
indicator is lit. Click Alarms to display the alarm review screen.
This screen displays all video segments that contain alarm images.
NOTE: Access to the alarm review screen is a protected feature.
You must possess the Playback Enable privilege to
access it (see Chapter 3 —System Setup on page 14,
Security Setup on page 39).
NOTE: You can change a column’s width by dragging the line
between column headers to the right or the left. The unit
does not save the column width settings when you
access this screen again.
Status — This column lists the review status for each video
segment. Reviewed segments are marked with a check.
Date/Time — This column lists the date and time for each video
segment.
Camera — This column lists the camera name for each video
segment.
Alarm — This column lists the alarm input or alarm type for each
video segment.
Duration (m:s) — This column lists the length of each video
segment in minutes and seconds.
Clear All — Select this option to clear all alarms from the alarm
review list. The display will be cleared, but all alarms will remain
in unit memory. You can search the image database for alarm
images at any time.
1. Click Clear All. A confirmation screen appears.
2. Click Yes to clear the list and return to the alarm review
screen. Click No to cancel the operation and return to the
alarm review screen.
Clear — Select this option to clear the highlighted alarm from the
alarm review list. The alarm will remain in unit memory. You can
search the image database for alarm images at any time.
To Next Page
Loading...
