Installation and Operating Instructions 115
Playback Screen
Using the Playback
Screen
The playback screen can be accessed in several ways.
From the main screen, click the Play/Pause button to access the
most recent images in the image database. Then use the controls to
review activity backward from this moment. The Play/Pause
button (also called Jog/Shuttle) controls how images are displayed
during image playback. The other type of control is the VCR type
of control. You can choose between the Jog/Shuttle or VCR type of
control during setup by clicking the Display button on the Setup
Options screen.
Jog/Shuttle (Play/Pause) button — You can control play/pause
as well as playback direction and speed by clicking and dragging
the on-screen control. See Playback Operation on page 111 for more
information.
VCR Play/Pause Control — You can control play/pause as well
as playback direction and speed by clicking each of the icons on the
on-screen control. The center icon selects pause mode, controls to
the right are forward play then fast play, the controls to the left are
reverse play and fast reverse play. If in pause mode, play or reverse
play will display image by image.
From either the main screen or the playback screen, click the Search
button to search the image database for specific video segments.
When the unit lists the segments that match the search criteria,
select a segment and click Play. Then use the controls to review the
segment.
From either the main screen or the playback screen, click the
Alarms button to display the alarm review screen. Select a video
segment that contains an alarm event and click Play. Then use the
controls to review the segment.
To Next Page
Loading...
