152 Intellex
®
LT Digital Video Management System
Archive Operation
Back Up the Image
Database
NOTE: In the Sony drive use only Sony brand DGD150P (20
GB), DGD125P (12 GB) or DGD120P (4 GB) tapes for
the best tape drive performance.
NOTE: Tapes created on this unit can only be restored on units
with the Intellex v2.4 or later software. However, this unit
can restore tapes created on units with any version of the
Intellex software.
The Image Database Backup screens guide you step-by-step
through the backup process.
NOTE: Backing up the image database is a protected feature.
You must possess the Archive Enable privilege to
access it (see Security Setup on page 39).
To back up the image database:
1. From the main screen, click the Archive button. The Archive
Options screen appears (see Archive Operation on page 151).
2. Click Back up images to tape. The opening Image Database
Backup screen appears.
3. Select one of the following options and click Next:
Back up while recording — Select this option to back up the
image database while recording (see Background Archiving,
below).
Stop recording and back up now — Select this option to stop
recording and back up the image database immediately (see
Foreground Archiving on page 156). This option is disabled if all
images in the image database have been archived.
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
Background Archiving Select this option to back up the image database while recording.
This is called background archiving because the unit continues
normal operation. It archives in the “background.”
NOTE: The Restore images from tape option is disabled during
background archiving.
To Next Page
Loading...
