Installation and Operating Instructions 59
Schedule Setup
6. After changing an active or alarmed segment, configure its
live filter and other settings (see Configuring an Active
Segment on page 64 and Configuring an Alarmed Segment on
page 66).
Deleting a Segment 1. Select the appropriate screen: Weekday, Weekend or Holiday.
2. Use one of the following methods to delete a segment:
• Create a new segment over the segment to delete.
• Change the start time of the segment to match its end time.
• Change the start time of the next segment to the start time
of the segment to delete.
• Change the end time of the previous segment to the end
time of the segment to delete.
• Use the custom schedule popup menu to delete the
segment (see Custom Schedule Popup Menu on page 59).
Copying a Camera Schedule 1. Select the appropriate screen: Weekday, Weekend or Holiday.
2. Move the mouse pointer to the name of the camera to copy.
3. Click and hold the mouse button. The mouse pointer changes
to .
4. Drag the mouse pointer to the camera to change. The new
segments appear on the camera line.
NOTE: The pointer changes to if it is dragged to an area of
the screen without a camera name.
Custom Schedule Popup
Menu
The custom schedule popup menu provides access to a variety of
custom schedule configuration options.
1. Select a segment or move the mouse pointer over a camera
name.
2. Click the right mouse button. The custom schedule popup
menu appears (one or more options may not be available).
Setup — Use this option to configure an active or alarmed
segment. This option operates the same as pressing the Setup
button on the Weekday, Weekend or Holiday screens.
To Next Page
Loading...
