Installation and Operating Instructions 97
Controlling Image Display
CONTROLLING
IMAGE DISPLAY
Image display is located in the central area of the screen, where the
unit displays images. The image area is affected by the following:
• Screen Format on page 97
• Image Area Popup Menu on page 98
• Image Area Zoom on page 100
• Full-Screen Operation on page 100
• Camera Sequencing on page 101
• Live Monitor (Optional) on page 102
• Unit Schedule on page 102
Screen Format
You can select from the following four screen formats:
1x1 Click this button to select the single window (1x1) format. The
camera assigned to this format will display. In this format, only one
camera can be displayed at a time.
You can also click any camera button to display a camera in this
format.
2x2 Click this button to select the four-window (2x2) format. The
cameras assigned to this format will display. In this format, up to
four cameras can be displayed together.
3x3 Click this button to select the nine-window (3x3) format. The
cameras assigned to this format will display. In this format, up to
nine cameras can be displayed together.
4x4 Click this button to select the 16-window (4x4) format. The cameras
assigned to this format will display. In this format, up to 16 cameras
can be displayed together.
See Chapter 3 —System Setup on page 14 and Display Setup on
page 82 for more information.
NOTE: You must close all open screens (except playback) before
changing the screen format.
To Next Page
Loading...
