106 Intellex
®
LT Digital Video Management System
Utility Options
Begin Record
When the image database fills completely with unarchived images,
recording stops and the unit displays a screen message. Use this
option to start recording again at the beginning of the image
database.
This option is only available when:
• The system is configured for linear mode operation (see
Record Mode Setup on page 76), and:
•The Begin recording later option was selected from the full
database notification screen.
NOTE: The Begin Record option is a protected feature. You
must possess the Record Enable privilege to access it
(see Security Setup on page 39).
To begin recording again:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options on page 105).
2. Click Begin Record.
3. If the image database has not been archived, select Yes and
click OK to start recording again (and return to the Utility
Options screen), or select No and click OK to cancel the
operation and return to the Utility Options screen.
4. If the image database has been archived, select Yes and click
OK to start recording again (and return to the Utility Options
screen), or select No and click OK to cancel the operation and
return to the Utility Options screen.
Generate Alarms
Use this option to manually generate an alarm event for one or more
cameras. These alarm events are treated like regular alarm events
(see Alarm Operations on page 141).
NOTE: This feature is only available for active cameras and will
not affect any cameras already in an alarm state.
NOTE: You can also access this feature using the Image Area
Popup menu.
Use this feature to document any scene or activity of interest. The
unit records images from the selected cameras at the Rate setting in
the Alarms portion of the Setup Options screen.
To Next Page
Loading...
