36 Intellex
®
LT Digital Video Management System
Audio
Audio
The Audio Setup screen allows you to set the output volume and
record volume for audio stream.
NOTE: You must possess the Setup Audio privilege to access
this screen
Audio Mixer — Use this tab to set up Audio recording via a Line In
or Microphone source.
Volume
Playback — Playback audio is audible when playing back
recorded video. The mute button will disable all playback
audio.
Live — Live video is audible when viewing live video. The
mute button will disable all live audio.
Record — Sets the source of the audio, None, Line In, or
Microphone. If None is selected, no audio is recorded.
Volume — Controls the recording input volume. The level
should be adjusted to provide adequate volume without
distortion.
Camera Associations — Select one or more cameras to be
associated with the audio stream.
NOTE: Audio must be associated with at least one camera to be
recorded.
Audio Mixer Tab
Under Output Volume use the slider controls to set the output level
for Playback, and set the output level for Live audio, for a Line In
or Microphone source.
Click the Mute button to disable Playback or Live audio for that
source.
Then under Record specify the audio source, either Line In or
Microphone.
Use the Record Volume slider control on the right to set the
recording level.
Under Record, select None to disable audio recording. To add an
input boost of 20 dB to the audio signal strength, click the
Microphone Boost button.
To Next Page
Loading...
