48 Intellex
®
LT Digital Video Management System
Schedule Setup
3. Click Setup to configure the filter (see Setup below).
Setup — Select a filter; then click Setup to configure it (see Live
Filter Configuration on page 68).
Select another Regular Schedule Setup Option for configuration.
Otherwise, click OK to accept the new day/night filter settings, as
well as any changes on the other Regular Schedule Setup screens,
and return to the Setup Options screen. Click Cancel to cancel the
changes and return to the Setup Options screen. Click Help to
display online help for this screen.
Regular Schedule Popup
Menu
The regular schedule popup menu provides access to several
regular schedule configuration options.
NOTE: The popup menu will not appear unless a filter name
appears in one of the filter fields.
1. Move the mouse pointer over either the Day Filter or the
Night Filter next to a camera name.
2. Click the right mouse button. The regular schedule popup
menu appears (one or more options may not be available).
Setup — Use this option to configure the selected filter for this
camera. This option operates the same as pressing the Setup
button.
NOTE: Before you can configure a filter, you must record at least
one image from the camera. Until an image is recorded,
the filter options are disabled.
1. Select the filter to configure.
2. Click the right mouse button to display the regular schedule
popup menu.
3. Select Setup. The appropriate filter screen appears.
Copy — Use this option to copy a filter configuration into the
unit’s memory. Then, use Paste or Replace to assign the filter
configuration to the other filter field (Day Filter or Night Filter).
1. Select the filter to copy.
2. Click the right mouse button to display the regular schedule
popup menu.
To Next Page
Loading...
