American Dynamics Intellex Intellex LT - Page 63

Installation and Operating Instructions 49
Schedule Setup
3. Select Copy. The unit copies the filter’s information into
memory.
Paste — Use this option to paste a previously copied filter
configuration from a camera’s Day Filter to its Night Filter or vice
versa.
NOTE: You cannot paste a filter configuration from one camera
to another camera.
1. Select the filter to copy.
2. Click the right mouse button to display the regular schedule
popup menu.
3. Select Copy. The unit copies the filter’s information into
memory.
4. Select the filter field to add the filter configuration you
copied.
5. Click the right mouse button to display the regular schedule
popup menu.
6. Select Paste. The unit pastes the filter’s configuration
information into the other filter field.
Replace — Use this option to replace an existing filter
configuration with a previously copied filter configuration. Use
this option when overwriting an existing filter configuration.
NOTE: You cannot replace the filter configuration on one camera
with one from another camera.
1. Select the filter to copy.
2. Click the right mouse button to display the regular schedule
popup menu.
3. Select Copy. The unit copies the filter’s configuration into
memory.
4. Select the filter to replace.
5. Click the right mouse button to display the regular schedule
popup menu.
6. Select Replace. The filter’s configuration replaces the
existing filter.