98 Intellex
®
LT Digital Video Management System
Controlling Image Display
Image Area Popup Menu
The Image Area Popup menu provides access to several live
display settings. This menu is especially helpful in full-screen
mode.
1. Move the mouse pointer over the image area. In some cases,
you must move the mouse pointer over a specific image.
2. Click the right mouse button. The Image Area Popup menu
appears (one or more options may not be available).
Switch to Full Screen NOTE: Image resolution does not increase; images are simply
displayed over a larger area.
Select this option to hide the controls and indicators and display the
images full-screen in the selected screen format.
Right-click the mouse and select Switch to Menu to exit full-screen
mode and display the controls and indicators again (see Switch to
Menu on page 99).
Single Pane NOTE: This feature is only available for active cameras.
Select this option to display the selected camera in the 1x1 format.
1. Move the mouse pointer over the camera’s image in the
image area.
2. Click the right mouse button. The Image Area Popup menu
appears.
3. Select Single pane. The unit switches the live display to the
1x1 format and displays the selected camera.
Generate Alarm NOTE: This feature is only available for active cameras and will
not affect any cameras already in an alarm state.
NOTE: Generating alarms is a protected feature. You must
possess the Generate Alarms security privilege to
access it.
Use this option to manually generate an alarm event for a camera.
Intellex treats generated alarms like any other alarm event.
To Next Page
Loading...
