Installation and Operating Instructions 183
Technical Specifications
TECHNICAL
SPECIFICATIONS
The following specifications only apply to the Intellex unit. The
manufacturer reserves the right to revise and improve its products.
All specifications are therefore subject to change without notice.
Programmable Settings
Camera Names Camera1–Camera16
Camera Termination 75 Ohms
Security Access Disabled
Administrator PIN 1234
Schedule Mode Regular
Record Settings Linear Mode, notify when 75%
full, normal quality, normal
sensitivity, 30 ips (25 ips PAL)
Alarm Duration Five seconds
Alarm Record Settings 30 ips (25 ips PAL), normal
quality, normal sensitivity
Alarm on Video Loss Enabled
Alarm Display Message Enabled
Latch Message Disabled
Alarm Input Names AlarmIn1–AlarmIn16
Alarm Input Polarity Active Low
Live Sequencer Dwell Two seconds
Live Display Format 1x1
Playback Overlay Enabled, Upper-Right
Video Format
Color (input and output) NTSC or PAL
B&W (input and output) EIA or CCIR
Video Level
Camera Inputs 1.0 V p-p, 75 ohms
Camera Outputs 1.0 V p-p, 75 ohms
Analog Output 1.0 V p-p, 75 ohms
To Next Page
Loading...
