56 Intellex
®
LT Digital Video Management System
Schedule Setup
Select another Custom Schedule Setup Option for configuration.
Otherwise, click OK to accept the new displayed list of holidays, as
well as any changes on the other Custom Schedule Setup screens,
and return to the Setup Options screen. Click Cancel to cancel the
changes and return to the Setup Options screen. Click Help to
display online help for this screen.
Single Camera Setup
Use the Single Camera Setup screens to record images from a single
camera at a specific rate and quality. Select the Use Single Camera
Schedule option. The unit displays the Single Camera tab and
removes all other tabs.
Single Camera — Click to display the Single Camera screen.
Select another Single Camera Schedule Setup Option for
configuration. Otherwise, click OK to accept the new displayed
schedule, as well as any changes on the other Single Camera
Schedule Setup screens, and return to the Setup Options screen.
Click Cancel to cancel the changes and return to the Setup Options
screen. Click Help to display online help for this screen.
Single Camera Setup Use the Single Camera screen to select the camera, rate and quality
for single camera operation.
Camera — Select the camera to record during single camera
operation. The first camera is selected by default.
1. Click down arrow. A list of cameras appears.
2. Click the desired camera.
Rate — Select the record rate in ips (images per second) for single
camera operation. The actual record rate is affected by motion and
other factors. The default is 30 ips (25 ips PAL).
1. Click down arrow. A list of record rates appears.
2. Click the record rate.
Quality — Select the record quality to use when recording this
camera. The default setting is Normal.
Super — Record images at the highest image quality. Since the
unit uses the lowest level of compression, this setting requires
the highest amount of storage space.
To Next Page
Loading...
