Installation and Operating Instructions 187
Technical Specifications
level audio sources.
Components
Main Monitor SVGA capable of 800x600,
noninterlaced, 60–70 Hz refresh
rate.
Hard Drives 3½", half height, IDE.
Network Card Supports 10BASE-T (10 Mbps)
and 100BASE-TX (100 Mbps)
network operation.
Power Supply
Input 115VAC, 50/60 Hz, 3.0 A
230VAC, 50/60 Hz, 1.5 A
Requires IEC-320-C13 plug.
NOTE: Before connecting power, set the voltage switch to the
correct voltage (“115” or “230”).
NOTE: The use of an Uninterruptible Power Supply (UPS) unit is
highly recommended. UPS units are used to protect
critical computing systems from power fluctuations that
may cause loss of data or damage to the system.
Accessories
Diskette Drive 1.44 MB, 3½", half height.
Digital Audio Tape Drive External tape drive, 5¼", half
height.
NOTE: In the Sony drive use only Sony brand DGD150P (20.0
GB), DGD125P (12.0 GB) or DGD120P (4.0 GB) tapes
for the best tape drive performance.
NOTE: Do NOT use 60- or 90-meter tapes, which have
insufficient storage capacity. Digital Audio Tapes Sony:
150 meter DDS-4 (2.0 GB), 125 meter DDS-3 (12.0 GB)
or 120 meter DDS-2 (4.0 GB)
NOTE: Proper maintenance of the tape drive is required for
reliable operation. Sony tape drives should be cleaned
after every 24 hours of operation. Use Sony cleaning
cartridges. Follow the directions included with the
cleaning cartridge.
To Next Page
Loading...
