Installation and Operating Instructions 161
Archive Operation
Restore Images
Select this option to copy images from an archive tape to the
restored images database. Once restored, these images can be
reviewed (see Play Restored Images on page 163).
NOTE: Restoring images is a protected feature. You must
possess the Archive Restore privilege to access it (see
Security Setup on page 39).
NOTE: It may not be possible to restore a tape while Data
Lifetime is cleaning the database. Avoid Restore
operations during Data Lifetime processing.
To restore images:
1. From the main screen, click the Archive button. The Archive
Options screen appears (see Archive Operation on page 151).
2. Click Restore images from tape.
3. Insert the backup tape that contains the images to restore.
4. After the tape drive lights stop blinking, click Next. The unit
checks the tape. If a tape problem occurs, the unit displays a
message. Refer to the Intellex Troubleshooting Guide to identify
the appropriate action.
Each message screen provides one or more options in addition
to the following two buttons:
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
To Next Page
Loading...
