160 Intellex
®
LT Digital Video Management System
Archive Operation
If the wrong tape is in the tape drive, the unit displays the following
screen:
Select one of the following options:
Recover the data now. — Select this option to recover the data
now. Insert the correct tape and click Next.
If you inserted the correct tape, the unit displays a message and
recovers the tape data automatically. Then it continues the archive
operation.
If you did not insert the correct tape, the unit displays this screen
again.
NOTE: We recommend that you recover the data immediately.
Otherwise, the recovery process could last up to two or
more hours. You could also lose the data on the tape.
Recover the data later. — Select this option and click Next to
recover the data later, using the Recover data from tape option
(see Recover Data from Tape on page 165). The unit uses this tape to
continue archiving. The tape will contain non-sequential video
segments.
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
To Next Page
Loading...
