Installation and Operating Instructions 107
Utility Options
NOTE: Generating alarms is a protected feature. You must
possess the Generate Alarms privilege to access it (see
Security Setup on page 39).
To generate one or more alarms:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options on page 105).
2. Click Generate Alarms. The generate alarms screen appears.
Select one of the following options:
(Cameras) — Select one or more cameras to manually generate an
alarm. Generated alarms do not become effective until you click
OK.
Clear — Click to remove the generate alarm settings from all
selected cameras.
OK — Click to generate alarms for all selected cameras and return
to the Utility Options screen.
Click Cancel to cancel this operation and return to the Utility
Options screen. Click Help to display online help for the screen.
Clear Latched
Use this option to clear alarm messages from the live display. It does
not clear the actual alarm.
This option is only available when the Latch Messages option is
selected in the Alarms portion of the Setup Options screen and
when one or more alarm messages appear on the live display.
NOTE: Clearing latched messages is a protected feature. You
must possess the Clear Latched Messages privilege to
access it (see Security Setup on page 39).
1. From the main screen, click the Utility button. The Utility
Options screen appears (see Utility Options on page 105).
2. Click the Clear Latched button. A confirmation screen will
appear.
3. Select No to cancel this operation and return to the Utility
Options screen. Select Yes to clear all latched alarms and
return to the Utility Options screen.
To Next Page
Loading...
