Installation and Operating Instructions 45
Schedule Setup
SCHEDULE SETUP
The Schedule Setup screens let you configure how the unit records
images under a variety of circumstances. You must possess the
Setup Schedule privilege to access it (see Add a New User on
page 39).
1. From the main screen, click the Setup button. The Setup
Options screen appears.
2. Click the Schedule button. The Mode screen (the first
Schedule Setup screen) appears.
The Mode screen lets you indicate whether the unit will operate on
a regular, custom or single camera schedule. The default is Use
Regular Schedule.
Use Regular Schedule — Select this option to use the same
schedule for all cameras (see Regular Schedule Setup on page 45).
Use Custom Schedule — Select this option to create custom
schedules for each camera (see Custom Schedule Setup on page 50).
Use Single Camera Schedule — Select this option to record
images from a single camera (see Single Camera Setup on page 56).
Regular Schedule Setup
Use the Regular Schedule Setup screens to use the same schedule
for all cameras. The unit uses the same schedule for weekdays,
weekends and holidays. Daytime operation begins at the set start
time and switches to nighttime operation at its start time.
Select the Use Regular Schedule option. The unit displays the
Rate/Quality, Time, Cameras 1–8, Cameras 9–16, and Data
Lifetime tabs, and removes all other tabs.
Click OK to accept the new schedule mode, as well as any changes
on the other Regular Schedule Setup screens, and return to the
Setup Options screen. Click Cancel to cancel the changes and
return to the Setup Options screen. Click Help to display online
help for this screen.
Regular Rate/Quality Setup Use the Rate/Quality screen to set the record rate and quality for
normal operation.
Rate — Select the record rate in ips (images per second) for regular
operation. The actual record rate is affected by motion and other
factors. The default is 30 ips (25 ips PAL).
To Next Page
Loading...
