44 Intellex
®
LT Digital Video Management System
Security Setup
Physical Keypad:
The physical keypad is located on the optional keyboard.
a. Make sure the numeric lock indicator on the keyboard is lit. If
not, press the numeric lock key on the keypad.
b. Press the numeric keys on the keypad to enter the code. Press
the Backspace key to erase an entry. Press the Enter or
Return key to enable (or disable) system security.
4. The system verifies the code. If you entered the correct code,
the system enables (or disables) security and closes this
screen. If you did not enter the correct code, the system
displays an error message. Click OK to close this screen
without enabling (or disabling) security.
To Next Page
Loading...
