92 Intellex
®
LT Digital Video Management System
Archive Schedule
End at … — Set the time to stop holiday archiving on the day
after the holiday. The default is 06:00 (6:00 a.m.).
To select the end time:
1. Click the hours display. Click up arrow or down arrow to
display the desired hour (24-hour format).
2. Click the minutes display. Click up arrow or down arrow
to display the desired minutes (30-minute increments).
Then select one of the following:
Weekday — Click to display the Weekday screen (see
Weekday/Weekend/Holiday Setup on page 53).
Weekend — Click to display the Weekend screen (see
Weekday/Weekend/Holiday Setup on page 53). This tab only appears
if the Include Weekend option is selected on the Archive Schedule
Mode screen (see Archive Schedule on page 89).
Holiday — Click to display the Holiday screen (see
Weekday/Weekend/Holiday Setup on page 53). This tab only appears
if the Include Holiday option is selected on the Archive Schedule
Mode screen (see Archive Schedule on page 89).
OK — Click to accept the weekend and holiday settings, as well as
any changes on the other Archive Schedule Setup screens, and
return to the Setup Options screen.
Cancel — Click to cancel the changes and return to the Setup
Options screen.
Help — Click to display online help for this screen.
Archive Schedule
Weekday/Weekend/
Holiday Setup
Use the Archive Schedule Weekday, Weekend and Holiday screens
to configure the archive schedule for each camera. All three screens
operate the same way.
NOTE: The Weekend tab only appears if Include Weekend is
selected on the Archive Schedule Mode screen (see
Archive Schedule on page 89).
NOTE: The Holiday tab only appears if Include Holiday is
selected on the Archive Schedule Mode screen (see
Archive Schedule on page 89).
To Next Page
Loading...
