186 Intellex
®
LT Digital Video Management System
Technical Specifications
Rear Panel Connectors
Camera In BNC. Composite video input
from camera.
Camera Out BNC. Composite video output
from camera (passive loop
through). Termination set
within Intellex.
Alarm Alarm connector block with
screw terminals.
Keyboard Standard PS/2-style connector.
Mouse Input device with standard
PS/2-style connector.
USB These connectors are used to
add RS-232 ports, data storage
devices, and other accessories to
the Intellex.
Monitor HD15-S. Live display SVGA
monitor output.
Call Monitor BNC output to optional call
monitor display.
Printer DB25-S. Parallel printer output.
Com2 DB9-P. Dome controller
(Sensormatic VM16 or
American Dynamics ADTT16)
input.
SCSI-3 High density 68-pin female
connector. For use with external
storage devices.
Network RJ-45. Category 3 or Category 5
twisted-pair Ethernet (CAT 3
TPE or CAT 5 TPE) connector.
Video Out BNC. Composite video output.
Microphone Compatible with dynamic,
condenser, and electret
microphones. Line input is
compatible with 1 Vrms line
To Next Page
Loading...
