60 Intellex
®
LT Digital Video Management System
Schedule Setup
To configure an active or alarmed segment:
1. Select the segment to configure.
2. Click the right mouse button to display the custom schedule
popup menu.
3. Select Setup. The Active Segment screen appears for an
active segment (see Configuring an Active Segment on
page 64.) The Alarmed Segment screen appears for an
alarmed segment (see Configuring an Alarmed Segment on
page 66.)
Copy — Use this option to copy one or more schedule segments
into the unit’s memory. Then, use a paste option to add the segment
and/or filter information to another segment or camera.
NOTE: The unit can only save information from one copy
operation at a time.
1. Select the segment to copy.
2. Click the right mouse button to display the custom schedule
popup menu.
3. Select Copy. The unit copies the segment’s information into
memory.
To copy all the segments for a camera:
1. Move the mouse pointer over the name of the camera to copy.
2. Click the right mouse button to display the custom schedule
popup menu.
3. Select Copy. The unit copies the information for each
segment on the line into memory.
Paste Segment(s) — Use this option to paste one or more
previously copied segments from one camera to another.
NOTE: This option only adds segment time information to
another camera.
1. Select the segment to copy.
2. Click the right mouse button to display the custom schedule
popup menu.
To Next Page
Loading...
