154 Intellex
®
LT Digital Video Management System
Archive Operation
Append to the end of the tape. — Select this option to con-
tinue the archive after the last saved image on the tape. At
times, an archive operation may not fill a tape. This option lets
you use your archive tapes more fully.
Overwrite the images on the tape. — Select this option to
write to the tape as if it is blank.
Use a different tape. — Select this option to eject the tape.
Start over with step 1.
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
4. Select one of the following:
Next — Click to begin backing up the image database in the
background. The unit closes this screen and returns to the main
screen.
The unit displays the Archive progress bar at the bottom of the
main screen. The bar indicates how much recording space has
been used on the tape. Then you can estimate when to insert a
new tape.
NOTE: If an accidental interruption occurs during background
archiving, see Recovering from an Interruption on
page 159 in this chapter.
The unit only interrupts normal operation when the tape is full.
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
5. To interrupt the backup, refer to Interrupting Background
Archiving on page 155.
To Next Page
Loading...
