4 Intellex
®
LT Digital Video Management System
Features
• Provides outstanding picture quality using a 640x480 pixel
display (800x600 in full-screen mode) with 256 gray levels
and over 16 million colors.
• Offers six record rates: NTSC — 60, 30, 15, 7.5, 2.5 and 1
images per second (ips); PAL — 50, 25, 12.5, 6.25, 2 and 0.8
ips.
• An optional live monitor (NTSC/EIA or PAL/CCIR) may be
installed. In this configuration, the unit displays live images
on the optional monitor, even when the unit is in playback
mode.
• The mouse pointer provides access to all unit functions.
• On-screen menus simplify system setup and operation.
• Online help information is available from every screen.
• One alarm input and one alarm output are available for each
camera. The polarity for each alarm input can be set to either
active high or active low.
• A security system provides password protection to restrict
access to various operation and configuration functions.
• On-screen display includes date, time, alarm status, video
loss and 10-character camera titles.
• Hard disk storage protects all system configuration
information against power loss.
• Unit storage capacity can be increased by installing an
additional internal storage or an optional external data
storage unit.
• An optional dome controller (Sensormatic VM16 or
American Dynamics ADTT16) can be used to select cameras,
change display format to 1x1, 2x2, 3x3 or 4x4 and to sequence
cameras (live mode only).
• One to five Intellex units can be connected over a TCP/IP
local area network (LAN) or wide area network (WAN). The
Network Client software must be installed on your computer.
To Next Page
Loading...
