American Dynamics Intellex Intellex LT - Record Mode Configuration

62 Intellex
®
LT Digital Video Management System
Schedule Setup
3. Select Copy. The unit copies the segment’s information into
memory.
4. Select the segment to add the filter you copied. (Select any
active or alarmed segment for the same camera on any
screen.)
5. Click the right mouse button to display the custom schedule
popup menu.
6. Select Paste Filter. The filter and its configuration
information are added to the new segment.
Paste Filter to All Segments — Use this option to paste a
previously copied filter configuration from one segment of a
camera to each segment of the same camera on another screen.
1. Select the segment to copy.
2. Click the right mouse button to display the custom schedule
popup menu.
3. Select Copy. The unit copies the segment’s information into
memory.
4. Move the mouse pointer to the segment’s camera name.
(Select the same camera on any screen.)
5. Click the right mouse button to display the custom schedule
popup menu.
6. Select Paste Filter to All Segments. The filter and its
configuration information are added to every active and
alarmed segment on the line.
Paste Segment(s) and Filter(s) — Use this option to paste
previously copied segments and filters from one camera line to that
camera’s line on another screen.
1. Move the mouse pointer over the name of the camera to copy.
2. Click the right mouse button to display the custom schedule
popup menu.
3. Select Copy. The unit copies the information for each
segment on the line into memory.