Installation and Operating Instructions 65
Schedule Setup
• Select the segment to configure; then access the custom
schedule popup menu (see Custom Schedule Popup Menu
on page 59); then select Setup.
Active segment: (camera name) from hh:mm to hh:mm. —
Indicates the camera name and the segment’s start and end times.
Quality — Select the record quality to use during this segment. The
default is Normal.
Super — Record images at the highest image quality. Since the
unit uses the lowest level of compression, this setting requires
the highest amount of storage space.
Normal — Record images at normal image quality. This
setting provides a balance between compression and storage
space requirements.
Extended Record — Record images at the highest level of
compression. This setting requires the lowest amount of
storage space.
Sensitivity — This setting lets you control how Intellex responds
to small, subtle changes between images. Select the sensitivity to
use during this segment. The default is Normal.
High — At this setting, Intellex records the smaller changes
between images, improving the perceived picture quality. As a
result, this setting requires more storage space.
Normal — At this setting, Intellex ignores the smaller, more
subtle changes between images.
Live Filter — Use this option to select the live filter to use during
this segment. When the live filter is activated, the unit switches to
alarm mode. The default is None.
NOTE: Before you can configure a live filter, you must record at
least one image from the camera. Until an image is
recorded, the filter options are disabled.
To Next Page
Loading...
