Installation and Operating Instructions 77
Record Mode Setup
NOTE: When the image database is full and Linear is selected,
recording stops and an option screen appears.
CAUTION: When the database is full and “Circular” is
selected, the unit starts recording at the beginning of
the database. As recording continues, the unit
overwrites older images, including alarm images.
Once overwritten, unarchived images cannot be
recovered.
Circular — In circular mode, the unit records from the beginning
to the end of the image database. When the database is full, the unit
automatically starts recording from the beginning of the database.
The unit does not clear the database. However, it overwrites older
images as necessary, both archived and unarchived, including
alarm images. Once overwritten, unarchived images cannot be
recovered.
Click OK to accept the displayed record mode options and return
to the Setup Options screen. Click Cancel to cancel the changes.
Click Help to display online help for this screen.
To Next Page
Loading...
