Ametek MX Series User Manual

User Manual – Rev BE AMETEK Programmable Power
MX Series 41
2.7 Supplemental Specifications
Supplemental specifications are not warranted and generally reflect typical
performance characteristics. These characteristics have been checked on a type test
basis only and are not verified on each unit shipped. They are provided for
reference only.
2.7.1 Output
Output Parameter
MX22.5
MX3 0
MX4 5
MX6 0
MX9 0
MX135
Voltage:
Slew rate:
> 0.5 V/ micro sec
Stability:
0.25 % over 24-hour period at constant line, load and temperature.
Settling t ime:
< 0.5 msec
Frequency:
Temperature coefficient:
± 5ppm per degree C
Stability:
± 15 ppm per year
Current:
Constant Power Mo d e :
Operation at higher currents but constant power is possible from 80% of Voltage range (125% of max. current) declining
to 100% of maximum current at 100 % of voltage range for short periods of time or at reduced ambient temperatures. (<
15 mins @ 30° C).
See Fig u r e 2-1.
NOTE: This mode requires firmware revision 0.27 or higher.
2.7.2 Acoustic Noise Levels
Ac o u s t i c Nois e:
Measured at a distance of one meter. (~3 ft.)
Fr on t
63 dBA at no load to 68 dBA at full load.
Ba ck
65 dBA at no load to 72 dBA at full load

Ametek MX Series Specifications

General

Brand	Ametek
Model	MX Series
Category	Power Supply
Language	English