Amsco Evolution Series - Page 101

7-7
Cycle and Control Value Programming Operator Manual 129390199
Enter Sterilize Temp (temperature) – Enter value
using the keypad.
Acceptable value range is determined by cycle
type and cycle temperature selected. Acceptable
ranges are shown on value-entry screen (refer to
Table 7-3).
Enter Sterilize Time – Enter the value using the
keypad.
Acceptable value range is determined by cycle
type and cycle temperature selected.
Acceptable ranges are shown on value-entry
screen (refer to Table 7-3).
Enter Dry Time – Enter the value using the
keypad.
Acceptable value range is determined by
cycle type and cycle temperature selected.
Acceptable ranges are shown on value-entry
screen (refer to Table 7-3).
Press (backspace) to clear values that have been entered.
Press (OK) to accept values that have been entered, and return to change cycle
values screen.
Press (exit) to abandon any values entered and return to change cycle values
screen.
Keypad
Backspace
OK (accept
changes)
Exit
(abandon
changes)
Continued from Previous Page
Press Cycle type to be changed.
Press
Press
Press
Keypad
Backspace
OK (accept
changes)
Exit
(abandon
changes)
Keypad
Backspace
OK (accept
changes)
Exit
(abandon
changes)