156
Constant Surface Speed (CSS) Setup
(900 With CSS and I/O Options)
If your DRO has the CSS option, you can use the DAC (Digital/Analog Converter) output
voltage to control the spindle speed. You can vary the DAC output voltage between 0V
and 10V with 12-bit resolution. A maximum of 5 different gears can be set up.
Use the following F-codes to set up the CSS feature:
F 96 DAC Output Voltage Setup
F 97 DAC Output Voltage Offset Adjustment
F 98 DAC Output Voltage Test
To Next Page
Loading...
