4-81
4.3 CDMA Transmitter and Receiver Test --- TX and RX Tester Mode
Function keys
1st page
[Start/Stop] F7: Starts Standby Output Power measurement. (Note)
[Calibration] F10: Displays the level calibration execution menu.
[Int. Osc. Calibration] F8: Performs the level calibration using an internal oscillator.
Calibration progress window is displayed during calibration.
[Calibration Cancel] F9: Cancels the level calibration data.
[return] F12: Returns to the previous menu.
[Back Screen] F12: Displays the previous screen.
Note:
Single key or Continuous key can start this measurement, where the Continu-
ous key forcibly makes the single operation. A single measurement measures
whichever is smaller, the number of frames set in the Measuring Period or the
access probe number set in the Measuring Number (refer to paragraph 4.3.6
(1)).
To Next Page
Loading...
