4-117
4.3 CDMA Transmitter and Receiver Test --- TX and RX Tester Mode
2nd page
[Offset Value] F7: Sets an offset value in output level offset display mode.
Range: –55.0 to 55.0 dB
Resolution: 0.1 dB
Initial value: 0 dB
[Offset On Off] F8: Increases or decreases the real output level to display.
Displayed value = Real output level value + Offset value
Range: On, Off
Initial value: Off
Note:
If a level is set using a numeric key when this item is On, the value becomes the
displayed value.
Real output level value = Displayed value - Offset value
[Back Screen] F12: Displays the previous screen.
• Modulation function key— The same as the Modulation function keys at the 1st page of the main function key
To Next Page
Loading...
