Section 4 Operation
4-144
• Write-protecting or write-enabling the file to be saved
This paragraph describes how to write-protect or write-enable the file containing data in the Save screen.
Step Key operation Description
1. Execute the Steps 1 to 4 of the saving procedure in the previous paragraph to
display the Save menu.
2. [Display Dir./Next Page] F8 Displays the existing files. Check the number of the file to be saved.
3. Cursor [ ], [ ] Select the file to be write-enabled.
4. [Write Protect] F11 Write-protects or write-enables the file to be saved.
To Next Page
Loading...
